30
HYDRAULIC WINDSHIELD SYSTEM HWS
TUBE Ø48
They are used to erect handrails on platforms and as a
bracing element between sections.
The existing lengths and corresponding item numbers
are shown in the table below.
Item No.
Length
Item No.
Length
2125288
0.50 m
2125249
3.10 m
2125289
1.10 m
2125648
3.60 m
2125290
1.60 m
2125250
4.10 m
2125291
2.10 m
2125251
5.00 m
2125647
2.60 m
0200600
6.00 m
Tubes are fixed by the wedge clamps on the “
Safety
Handrail 1.5”
.
DOUBLE SPIGOT D48
This socket is used to connect 2 tubes Ø48 end-to end,
and achieve the desired length.
COUPLERS 48/48
Couplers
are
used
to
connect
two
tubes
perpendicularly. The swivel coupler is used for joints
different to 90º.
SIMPLE BRACING
Element to fix the bracing tubes D48 between HWS
sections.
2.2.10.
COVER ELEMENTS
The cover elements are used for closing the “vertical
gaps” between HWS sets and “horizontal gaps”
between platforms.
Following some examples of covers:
Horizontal gap cover with Net or Plywood:
Vertical gap cover with “Rubber”:
HINGES FOR HORIZONTAL COVERS
Items used to fix the horizontal TAPERS to the timber
Beams VM20 of the HWS set. They are fixed with
“Screws 6x60 din-7505-a (0249911)”.
2.2.11.
PREVIOUS VERSIONS
The following items are PREVIOUS
VALID
VERSIONS of
“ANCHORS” and “BLOCKS” that ARE
NOT COMPATIBLE
IN THE SAME PANEL with the “NEW VERSIONS LT”.
Always before using check the compatibilities and the
warehouse availability.
Double Spigot D48
(2125312)
Right Angle
Coupler 48/48
(2125148)
Swivel Coupler 48/48
(2125147)
Hinge 82x125 d5.75
(1991235)
Hatch Hinge
(0919125)
Simple Bracing
(0260505)