Ulma HWS Скачать руководство пользователя страница 29

Страница: 29 / 66

HYDRAULIC WINDSHIELD SYSTEM HWS



BOARDS TO DECK THE PLATFORMS

The platforms can be performed by means of wooden

planks in which case the minimum dimensions that they

must have is at least 15 x 5cm and class resistance C24

according with EN 338. The following ULMA standards 3

Layers Board can also be used:

3 Layers Plywood 2000x503x27

3 Layers Plywood 2500x500x27

2.2.9.

HANDRAIL ELEMENTS

Below, the different handrail elements and their use are

shown:



HANDRAIL POST 1.5

It is part of the handrail system. Tubes or planks are

connected to the safety handrail posts to complete the

handrail system.

The Safety Handrail 1.5 (2211156) has wedges to ease

the assembly of the tubes.

The Handrail Post 1.5 Wood (2211185) has a metallic

placers in which the planks are positioned.

The handrail post is inserted in the corresponding

socket. An adjustable toe board holder is included at

the bottom of the handrail post.



HANDRAIL SOCKET D50

Handrail support used on platform “walers MK-120”. It

is fixed inside the waler with 2 pins.

- Socket inside:

2 Pins E20x70 (0252070) + Cotter Pins R/5 (0250000)

- Socket outside:

2 Bolts M20x100 DIN931-8.8 (0242010) y
Nuts. M20 DIN985-8 (0242008)



VM HANDRAIL SUPPORT

This element supports the “Safety Handrail” used on

platform timber beams VM20. It is fastened with 2

"Panel Bolts" and 2 "Hexagonal Nuts".

VM Handrail

Panel Bolt

Hexagonal

Support (2211165)

(1861122)

Nut 15(7238001)



HANDRAIL HEAD MK

Tube fixed to the “Walers MK-120”to support the

“handrails couplers” and “bracing tubes”.

It is fastened to the waler with 2 Bolts M16X90

(0241690) and 2 Nuts M16 (0241608).

Handrail Post 1.5

(2211156)

Handrail Post 1.5 Wood

(2211185)

Handrail

Socket D50

(0121004)

Handrail HeadMK

(1990570)

Right Angle Coupler

48/48 (2125148)

Waler MK-120l

Tubes D48

Содержание HWS



































































Результаты поиска

Содержание HWS

Отзывы:

Ulma HWS, Руководство пользователя, Страница: 29 / 66

Результаты поиска

Содержание HWS

Отзывы: