UI SP-556 series, Руководство по эксплуатации

Страница: 38 / 52

- 35 -
１２．Teaching function
What is the teaching function?
Change the current indication level to any value.
(setting automatic as for the scaling data.)
[Ex.] when input frequency 100Hz is displayed as 200.0rpm, for changing the
display value from 200.0 to 180.0, converted value may be changed, whereas, upon
setting ”180.0”by the teaching function, 180.0 is automatically displayed. At this time,
converted value is automatically re-written by reverse calculation from the set value as
180.0
Set-converted Scaling data Automatically re-written converted Scaling data
Converted value 3333 Converted value 3000
EXP 5 ⇒ EXP 5
Table.5
Operating key Indication Procedure
Ａ Ｂ Ｃ Ｄ Ｅ
０ ２ ０ ０．０
Push for 2 sec.. or more.
In the case of A input measurement, A input lamp blinks.
In the case of B input measurement, B input lamp blinks.
Ａ Ｂ Ｃ Ｄ Ｅ
０→２→０→０→０
A figure of flash indication is shifted. Each
time the key is pressed, a flash figure is
shifted, to the right.
Ａ Ｂ Ｃ Ｄ Ｅ
０ １ ８ ０．０
↑
0 - 9
Push this key for changing the value
flashing.
One figure moves up and down every time it pushes
once.
After input of the desired value from the data
value 200.0, push .
Upon pushing this key, the measuring mode
returns, and the converted Scaling data and EXP
value can be re-written.
It returns to the measurement display
without registering a set value.
（The decimal point position links setting of Mode No.0 “E” Display decimal point setting）
！ ＜Caution＞
・This teaching function can set only ratemeter (speed, rotation,flow rate) of A-input and
B-input. (Need to set in Mode No.0
‘
BC
’
00 or 01)
When it is other measurement types, teaching function becomes invalid.
・Do not make this operation at time of stop or low turning(Frequency) .
ENT
RST
ENT
ENT