UI SP-556 series, Руководство по эксплуатации

Страница: 22 / 52

- 19 -
（１３）
〔Cycle-timer measurement〕
１）When sensor input A does ON, it is started time measurement.
２）It is displayed measurement time when sensor input did ON again, and
time measurement is started again.
３）The time measurement is suspended between ON sensor input B.
４）When ON did reset input, indication is returned to 0, and the time measurement stops.
！ ＜Caution＞
When blackout and power supply OFF are considered to be it when they use
this function, indication measuring returns to 0.
（１４）
〔Stop watch A〕
１）When sensor input A does ON, a measurement is started and displays it
at the same time. When sensor input A does ON once again, a
measurement is stopped.
２）Sensor input B works as input in a lap time.
When ON is considered to be it during time measurement, the indication
is performed hold of, but can continue measuring the time.
Then,
When B sensor input does ON, it is gone back up for time
measurement indication.
The second input is not B sensor, and, in the case of A sensor, the time
until the point in time is displayed, and time measurement is stopped.
３）When ON did reset input, indication is returned to 0, and the time measurement stops.
！ ＜Caution＞
When blackout and power supply OFF are considered to be it when they use
this function, indication measuring returns to 0.
Reset
Sensor Ｂ
Sensor Ａ
Internal counter
Indication
counter
Internal
Indication
0 7 9
01234 4 567 0123456789 0123
Internal counter
Reset
Sensor Ｂ
Sensor Ａ
Indication
counter
Internal
counter
Internal
Indication