UI SP-556 series, Руководство по эксплуатации

Страница: 17 / 52

- 14 -
９．Initial setting values and initialization
If the specifications desired by the user are requested prior to shipment, the meter will be
set these settings. Other wise, the regular factory settings are shown below.
Value setting of each mode (Table 2)
Mode No. Initial setting Notes
Ａ Ｂ Ｃ Ｄ Ｅ Ｂ Ｃ Ｄ Ｅ
０． ０ ０ ２ １
１． １ ０ ０ ０
２． ３ ０ ０ ２
３． １ ０ ０ ０
４． ３ ０ ０ ２
５． １ ０ ０ ０
６． － ０ ２． ０ －
７． ０ － ０ ０ －
８． ０ ０ ０ ０
９． ０ ０ ０ ０
Ａ． ０ ０ ０ ０
ｂ． ０ ０ ０ ０
Ｃ． － １ ０ － － －
ｄ． １ ０ ０ ０
Ｅ．（Ｂ） － － － ０ － － －
Ｆ．（ＢＩ） ０ － ０ １ －
Presetting output set value (Table 3)
OUTPUT No. Ａ Ｂ Ｃ Ｄ Ｅ Ａ Ｂ Ｃ Ｄ Ｅ
ＯＵＴ１ ９ ９ ９ ９ ９
ＯＵＴ２ ９ ９ ９ ９ ９
ＯＵＴ３ ９ ９ ９ ９ ９
ＯＵＴ４ ９ ９ ９ ９ ９
＜Initialization＞
Throw power supply in with pressed to initialize the settings.
After the initialization, the set values will be as shown in Table 2, Table 3. Mode protect
function are also cleared.
！ ＜Caution＞
※Since an initialization changes all existing setting values to the initial setting values,
be sure to record all the setting values before an initialization.
※In case the computer froze when unusual functioning occurred with the normal
operation, initialize according to the above procedure and set the desired value again.
ENT