- 32 -
Mode No.
Analog output：Setting of maximum output indication (Option AV3-5/AI)
ｄ
Ａ Ｂ Ｃ Ｄ Ｅ
ｄ．１ ０ ０ ０
Indication value：0001 - 9999.
(Do not set 0000)
Set an indication value of the time when the analog output is maximum.
Set a value in four digits, neglecting the decimal point. For example,
both 500.0 and 50.00 are all right.（It sets as "5000" in this case.）
〔Ex.〕Setting to output it to the maximum voltage current when it in real time
outputs, and the display value becomes 5000 is the following.
Ａ Ｂ Ｃ Ｄ Ｅ Mode No.
”
C
”
Ｃ． ０ ０ Ｃ：０（Real time output）
D：０（Right 4digits：comparison）
Ａ Ｂ Ｃ Ｄ Ｅ Mode No.
”
d
”
ｄ．５ ０ ０ ０ B - E（Setting of maximum output ndication;5000）
NOTE：he analog output outputs it at absolute value for an indication level.
（There are no relations in a plus and the minus of the indication level）
In the case of the example mentioned above, it is output as follows.
( option：AV4 )
※ For an analog output MAX level, it is output linearly to 102.3%.
※ When setting Mode No. d as (0000), an analog output is always 102.3%.
Mode No.
BCD output setting (Option B)
Ｅ
Ａ Ｂ Ｃ Ｄ Ｅ
Ｅ． ０
BCD output (logic selection)
0：Data (positive) ・TI (positive)
1：Data (negative)・TI (positive)
2：Data (positive) ・TI (negative)
3：Data (negative)・TI (negative)
※In the case of
“
1
”
, indication is output as follows.
Indication
Bit data
Open collector output
8
4
2
1
8
4
2
1
Positive
1
0
0
0
1 OFF OFF OFF
ON
Negative
1
0
0
0
1
ON
ON
ON
OFF
Содержание SP-556 series
Страница 45: ...42 Unredeemable type Option DM Fig 28...
Страница 49: ...46...
Страница 50: ...47 MEMO...
Страница 51: ...48 MEMO...
