UI SP-556 series, Руководство по эксплуатации

Страница: 10 / 52

- 7 -
⑨ Mode key
Measurement state：It enters the mode setting state if ＋ are pushed
for 2 sec. or more.
：It enters the preset output setting state if only is pushed
for 2 sec.or more.
Setting state：When the mode is set, the mode number is raised.
When the preset output is set, OUT1-4 is changed.
⑩ Up key
Setting state：When each setting it, the numerical value of a set digit is raised.
⑪ Down key
Measurement state：When this key is pushed for 2 sec. or more, the state of the mode
protecting is displayed. （Refet to P.34 Mode protect function）
Setting state：When each setting it, the numerical value of a set digit is lowered.
⑫ Shift key
Measurement state：When Mode No.0 BC is
“
00
”
(A input measurement) or
“
01
”
(B input measurement), The teaching function works.
（Refet to P.35 Teaching function）
Setting state：When each setting it, a set digit is shifted to a right digit.
⑬ Enter key
Measurement state：When Mode No.0 BC is
“
02
”
-
“
07
”
(ratio measurement), the measurement
display switch of Ratio measurement / A input measurement /
B input measurement can be done.
Setting state：When the mode is set, and the preset output is set, a set value is registered,
and it returns it to Measurement state.
⑭ Reset key
Measurement state：When this key is pushed for 2 seconds or more, the output of
measurement reset (Indicated value 0) and preset output OFF.
Setting state：When the mode is set, and the preset output is set, a set value is not
registered, and it returns it to Measurement state.
Mode
Mode
ENT
RST
Mode