UI SP-556 series, Руководство по эксплуатации

Страница: 19 / 52

- 16 -
≪2．Content of the each mode and set value≫
Mode No. Measuring types, Measurement unit, Display decimal point
０
Ａ Ｂ Ｃ Ｄ Ｅ
０．０ ０ ２ １
Display decimal point setting
0： 0 2： 0.00
1： 0.0 3：0.000
Measuring unit
0：hour
1：minute
2：second
3：hour-minute The above measurement selecting
4：minute-second 08,13 - 15 alone can be used.
Measuring types
00：A-input：speed, rotation, flow rate measurement
01：B-input：speed, rotation, flow rate measurement
02：Ratio measurement (absolute ratio measurement)
B/A×100
03：Ratio measurement (error ratio measurement)
(B-A)/A×100
04：Ratio measurement (difference measurement)
A-B
05：Ratio measurement (density)
B/(A+B)×100
06：Ratio measurement (sum measurement)
A+B
07：Ratio measurement (differential rate measurement)
(A+B)/R or (A-B)/R
08：Passing time measurement
09：Shot speed UA (2 sensor one direction speed)
10：Shot speed UB1 (1 senor one direction speed)
11：Shot speed UB2 (1 sensor reciprocal speed)
12：Shot speed UC (2 sensor reciprocal speed)
13：Cycle-timer measurement
14：Stop watch A
15：Stop watch B
NOTE：Upon setting 16 - 19, same operation as with 00 is mode.
Option：AV3-5/AI
In analog output,
The real-time output functions only when I set Mode No.0
“
00
”
(A input) or
“
01
”
(B input) or
“
08
”
(Passing time measurement).
Otherwise, set it in 1(Synchronizes for the display).
When use analog output, the measurement unit choose 0(hour) or
1(minute) or 2(second).
（００）
（０１）
〔Ratemeter〕
When I use it in Ratemeter (speed, rotation,flow rate), choose this mode.
Choose
“
00
”
(A input) or
“
01
”
(B input).