UI SP-556 series, Руководство по эксплуатации

Страница: 31 / 52

- 28 -
Mode No. OUT1：Preset output (open collector output)
８
Ａ Ｂ Ｃ Ｄ Ｅ
８．０ ０ ０ ０
Output mode
0：Comparison 5：100 ms (1 shot)
1：Hold 6：250 ms (1 shot)
2：10 ms (1 shot) 7：500 ms (1 shot)
3：20 ms (1 shot) 8：1 sec (1 shot)
4：50 ms (1 shot) 9：2 sec (1 shot)
Upper or lower limit selection
0：Upper limit
1：Lower limit（Immediate）
2：Lower limit（Delay）
Judgement output prohibition time：00 - 99 sec
〔Output mode〕
0：Comparison
This is output when the indication value exceeds the upper/
lower limit setting value（preset value）. When the indication
value returns to within the set range, the output is turned off.
1：Hold
This is output when the indication value exceeds the upper/
lower limit setting value（preset value）. The presetting
output,once activated, is sustained until reset.
2～9：One shot output
A pulse of pre-specified width is output once when the
indication value exceeds the upper/lower limit setting value
（preset value）.
〔Upper and lower limits selection〕
0：Upper limit：It outputs, 「Indication value ≧ Preset value」
１：Lower limit（Immediate）：It outputs, 「Indication value ≦ Preset value」
２：Lower limit（Delay）：It outputs,
「Indication value ＞ Preset value → Indication value ≦ Preset value」
〔Judgement output prohibition time〕
The time in seconds following power startup or reset at which
the presetting output function is activated is specified.
〔Ex.〕Preset output OUT1 works 5 sec. later after ON did a power supply.
It is set by the upper limit output and output maintenance hold.
Ａ Ｂ Ｃ Ｄ Ｅ
８． ０ ５ ０ １