UI SP-556 series, Руководство по эксплуатации

Страница: 36 / 52

- 33 -
Mode No. BCD input setting (Option BI)
Ｆ
Ａ Ｂ Ｃ Ｄ Ｅ
Ｆ．０ ０ １
BCD input (logic selection)
0：High active (Each pin and GND is open)
1：Low active (Each pin and GND is Short)
Latch input (logic selection)
0：
”
Short
”
Latch (Uptake is possible in open)
1：
”
Open
”
Latch (Uptake is possible in short)
Selection of BCD input
0：Function-stop
1：Preset value OUT1
2：Preset value OUT2
3：Preset value OUT3
4：Preset value OUT4
NOTE：Please use this setting without fail (0: function stop)
when using it excluding with the BI type.
Selection of BCD input：
Using BCD input, I select which Preset output I operate.
！ ＜Caution＞
When it is with an
“
P2
”
option, OUT3 and OUT4 works.
When there is not BI option, please
“
0
”
（Function-stop） this setting.
Latch input (logic selection)：
０（
”
Short
”
Latch）：When Latch pin and
“
GND
”
are in a short state,
I prohibit the uptake of data.
１（
”
Open
”
Latch）：When Latch pin and
“
GND
”
are in a open state,
I prohibit the uptake of data.
BCD input (logic selection)：
Logic choice of BCD data
０（High active）：Each pin of input data is in condition to open with GND.
１（Low active）：Each pin of input data is in condition to short with GND.