UI SP-556 series, Руководство по эксплуатации

Страница: 23 / 52

- 20 -
（１５）
〔Stop watch B〕
１）When sensor input A does ON, a measurement is started and displays it
at the same time.
２）When ON does B sensor next, a measurement stops.
３）When reset input is performed ON of, indication and the internal counter
are corrected to 0 and are stopped time measurement
！ ＜Caution＞
When blackout and power supply OFF are considered to be it when they use
this function, indication measuring returns to 0.
Measuring unit
１）Choose any Measuring unit. But. when I chose
“
00
”
(A input) or
“
01
”
(B input),
“
03-07
”
(Ratio measurement),
“
09-12
”
(Shot speed).
3：hour-minute becomes 1：minute.
4：minute-second becomes 2：second.
２）When it is chosen
“
０８
”
(Passing time measurement),
”
１３～１５
”
(Cycle-timer, Stop watch A and B) by a measuring types,
3：hour-minute and 4：minute-second are selectable.
When it is chosen Measuring unit above, please refer to P.36 (caution
below)for preset output.
Display decimal point setting
Please set a position displaying a decimal point.
But the decimal point is ignored when I set 3：hour-minute or
4：minute-second with Mode No.0
“
D：Measuring unit
”
.
NOTE
This decimal point setting links setting of the preset output.
Indication
Reset
Sensor Ｂ
Sensor Ａ
2 Indication 0 1 5 3 4 6 1 2 4 8 7 9 0