Instruction for use (rev 141119)
e.ON 200 NEO / e.ON 250 NEO
UGIN DENTAIRE
11
8)
When the tray has reached the lower position, the firing or pressing base can be placed on top
9)
After approximately 40 seconds, the start screen of the furnace appears (Fig 1). The installation is
completed
Fig 1: start screen
IMPORTANT: even if the use of this furnace is very intuitive, it is recommended to read the
instructions for use carefully prior to its first use. These instructions are directly accessible by
pressing the “document” key
Содержание e.ON 200 NEO
Страница 2: ......
