Ugin e.ON 200 NEO, Инструкция по эксплуатации

Страница: 18 / 33

Instruction for use (rev 141119) e.ON 200 NEO / e.ON 250 NEO
UGIN DENTAIRE
18
This function allows to update the software and process versions, and the documents.
These parameters cannot be accessed without a valid code. The code will be provided to the user along
with the required updates. Another code is reserved to the service technician for maintenance purposes.
5.2.15. Version Application
These indications refer to the version of the controller software of the furnace.
This may be useful in communications between the user and the supplier of the unit.
5.3. DOCUMENTS
Documents
This function allows to view the instructions for use directly on the furnace’s screen. The .pdf files can be
printed via a computer. This is simply done by transferring them to the USB stick supplied with the furnace
(see chapter 5.2.10.1: Copy Prog (Four → USB).
When press the “Documents” key, a menu of 6 lines appears. Select the desired file to access it. The key
arrow allows to return to the start screen. You can zoom in on specific areas. The principle is identical
to that of Smartphones.
IMPORTANT: instructions for use have a specific name. The unit will only recognize the following names:
- EON-FR.pdf
- EON-EN.pdf
- EON-DE.pdf
- EON-IT.pdf
- EON-ES.pdf
- EON-RU.pdf
- EON-CH.pdf
Two other types of files can be displayed on the furnace:
- 1 video file “Video.mp4” (size 1 Go maxi)
- 1 image file “Image.jpg“
The instructions for use are subject to change. They are updated via the USB stick as described in the
section “Technician parameters” (see chapter 5.2.14)
The same procedure applies to the Video and Image files.