Ugin e.ON 200 NEO, Инструкция по эксплуатации

Страница: 6 / 33

Instruction for use (rev 141119) e.ON 200 NEO / e.ON 250 NEO
UGIN DENTAIRE
6
- Ensure that the pneumatic hoses (power socket and vacuum pump) are in perfect condition
- Ensure that the movement of the tray is not blocked by an object, this may result in
malfunction of the unit and damage to certain components
- The furnace must be placed on a flat surface, keeping sufficient clearance around the unit to
ensure proper ventilation
- Do not block the ventilation openings to avoid overheating
- Firing base and support pressing are made up ceramic fibres. Handle carefully
- They can release dust: remove with a vacuum cleaner - do not blow or use compressed air
- For moving, take hold the furnace by its base. Never lift by upper part of furnace: risk
material damage
- Never use the furnace without firing base / support pressing. Use only those provided by
UGIN DENTAIRE. Before use, check it (no dirt or damage). If damage: do not use. Place only
one firing base or one support pressing on the tray (do not stack, never simultaneously)
-
Use only genuine spare parts. The use of non-original spare parts voids any warranty for your
device
-
Do not introduce stranger objects inside the unit during the maintenance operations. It is
forbidden to modify the material without authorization
-
Do not execute different operations of maintenance from those brought back in the manual.
Whichever operation not included in this manual, can involve risks
-
For whichever information concerning installation, maintenance and use, contact the
customer’s service UGIN DENTAIRE
1.3. WASTE DISPOSAL
Observe the waste disposal regulations for electrical and electronic equipment: do not dispose of with
household waste.
The unit is subject to Directive 2012/19/EU on waste electrical and electronic equipment and to the laws of
the country in which it is being used, and must be disposed of in accordance with applicable regulations.
Firing base and support pressing made up refractory ceramic fibres. They must be disposed in accordance
with applicable regulations in force.