Ugin e.ON 200 NEO, Инструкция по эксплуатации

Страница: 14 / 33

Instruction for use (rev 141119) e.ON 200 NEO / e.ON 250 NEO
UGIN DENTAIRE
14
5.2.5. Temperature unit
There are two possibilities: Celsius or Fahrenheit degrees.
The default temperature reading is set to Celsius. Press °F to change to Fahrenheit.
5.2.6. Pressure unit
There are two possibilities: millibar (mbar) or millimeters of mercury (mmHg).
The default values are displayed in mbar. Select mmHg to change to millimeters of mercury.
5.2.7. Sound
The furnace is set by default to “Bip 1”. This setting can be changed in the drop-down menu. Press the
▼
button and confirms your choice. The new acoustic signal is now activated
5.2.8. Sound level
When selecting this field, the alphanumeric keypad appears at the bottom of the screen. The sound
volume set by default to 100 (maximum) can now be changed. To mute the sound, set the value to 0 (zero)
5.2.9. Screen saver (min)
The indicated value shows the time that will elapse before a screen saver is activated. This setting can be
changed from 15 to 30 minutes.
In stand-by mode, the pictograms in the start screen will disappear and the UGIN DENTAIRE’s logo will start
moving randomly on the screen. Only the RETURN key and the time indication are displayed.
You can leave this mode by touch the screen.