Ugin e.ON 200 NEO, Инструкция по эксплуатации

Страница: 24 / 33

Instruction for use (rev 141119) e.ON 200 NEO / e.ON 250 NEO
UGIN DENTAIRE
24
5.5. SPECIAL CERAMIC FIRING PROGRAMMES (SP)
Pictogram
start screen
Program Programmes name
Ceramic SP (Special Ceramic) C101 to C200
Favorite Ceramic SP (Favorite Special Ceramic) C101 to C200
Except for the program numbers, the display is identical to that of ceramic firing programmes.
This type of cycle is used for:
-
firing dental ceramics requiring an intermediate stage before the final temperature is reached (curing)
- the two-stage program when firing prefabricated ceramic structures
This programme therefore contains several additional parameters:
Stage temperature
Always ≥ preheating temperature and ≤ final temperature
Stage holding time temperature (0’00’’ to 59’59’’)
Indicates the holding time when the temperature of the intermediate stage is reached
Value: 0 minutes and 0 secondes to 59 minutes and 59 secondes
Rate 2 (20 to 150°C/min)
Indicates the rate of increase between the holding temperature and the final temperature
5.5.1. FAVORITE CERAMIC SPECIAL
Favorite Ceramic SP
The 100 ceramic special firing programmes can be designated as FAVORITES.
Just select the desired program and press the star next to the name of the cycle.
The corresponding parameters can be immediately modified in “Favorite Ceramic SP” or in “Ceramic SP”.
To remove the programme from FAVORITES: deactivate the star.
NOTE: FAVORITES management is identical to ceramic firing