https://ucore-electronics.com
50
Figure 18. Advanced mode
There are many buttons in this section. These buttons;
Add:
Adds a new test point to the database list.
Delete:
Deletes the test point selected in the list.
Delete All:
Deletes the entire list.
Move Up:
Moves the selected test point up one position.
Move Down:
Moves the selected test point down one position.
Load Image:
Opens a new window to load the visual of the electronic board to be tested.
Load Data:
Loads a database saved on disk to the list.
Save Data:
Saves the created database on disk.
>>>:
Selects the next test point.
<<<:
Selects the previous test point.
There are also two checkboxes in this section.
Inc.:
This check box adds an incremental number to the end of the test name. Thus, a different test name is
created each time when the
Add
button is clicked.
Auto Test:
This check box is selected to start the comparison test from the database.
