https://ucore-electronics.com
3
1.
Introduction
With this unique device, you will have the basic devices needed for fault detection of electronic
boards: Oscilloscope, curve tracer, signal generator and short circuit finder.
UCE-DSO4200C can transmit all data to a PC via USB connection. This USB connection provides the
possibility to use the device with PC software.
In addition, this device can mirror the LCD screen image to a monitor via the HDMI output and can
be controlled with a wireless mouse.
In the curve tracer mode, passive elements can be checked without triggering active elements with
a 0.2V test signal. Thus, less component disassembly is ensured in troubleshooting.
In short-circuit finder mode, the short-circuit line on the PCB can be analyzed and its location can
be found.
Specifications:
•
Display:
5.0-inch
800× 480 pixel color LCD with Touch screen
•
Oscilloscope Channels:
2
•
Curve Tracer Channels:
2
•
Signal Generator Channel:
1
•
PC connection:
mini USB connector (USB 2.0 HID protocol).
•
Storage:
internal 4GB disk (microSD card)
•
HDMI out
for TV or M
onitor (800×480 @60Hz)
•
Multi-Device Wireless
Mouse
for Device and PC
•
internal battery:
3.7V 10,000mAh (~4.5 hours)
•
Power Consumption:
15W
•
Dimensions:
170 x 200 x 140 mm
Features of Oscilloscope:
•
Analog Bandwidth:
20MHz
•
Maximum sampling rate:
8-bit 250 MS/s Real-Time Sampling, 6 GS/s Equivalent-Time Sampling
(ETS)
•
Sampling depth:
8kB
•
Input impedance:
1MΩ
•
Vertical sensitivity:
5mV/div
10V/div
•
Horizontal sensitivity:
10ns/div
500ms/div
