https://ucore-electronics.com
45
When the oscilloscope menu is opened, the device also switches to oscilloscope mode and simultaneously
the data is reflected in the graphics area. As shown below, channel-1 is set in the yellow section, while
channel-2 is set in the red colored section.
To set the vertical scale of the channel, click on the parameter to open the scale list and click on the desired
value.
It is possible to adjust the coupling in a similar way. It is selected by clicking the parameter and clicking the
desired coupling from the list.
The offset is adjusted in two different ways. It can be adjusted by clicking the up and down arrows next to
the offset parameter below, or it can be adjusted quickly by holding the GND reference of the channel with
the mouse cursor and dragging it up and down. When the mouse cursor is over the channel GND reference,
the shape of the cursor becomes "+".
Adjustment with the arrow buttons next to the offset parameter.
When the mouse is over it, the cursor appears in the "+" form
The reference level is displayed as a horizontal dashed line when dragged.
When the
“
Reset Offset
”
button is clicked, the offset is set to 0V.
