18
Figure 8: Baffle Orientation in Flueways
Step a.
Install stainless steel baffles provided in
miscellaneous parts carton as follows, refer to Table
3 and Figure 8:
•
Model MPO-IQ84 - To install flueway baffle in 3
rd
pass on left side of boiler, hold baffle with word
"Left" readable at the top. Slide baffle in flueway
until position tab touches fins on left side of 3
rd
pass flueway. To install flueway baffle in 3
rd
pass
flueway on right side of boiler, hold baffle with
word "Right" readable at the top. Slide baffle in
flueway until position tab touches fins on right
side of 3
rd
pass flueway.
•
Model MPO-IQ115 - To install flueway baffle in
3
rd
pass on left side of boiler, hold baffle with word
“Left” readable at the top. Slide baffle in flueway
until position tab touches fins on left side of 3
rd
pass flueway. To install flueway baffle in 3
rd
pass
flueway on right side of boiler, hold baffle with
word “Right” readable at the top. Slide baffle in
flueway until position tab touches fins on right
side of 3
rd
pass flueway. To install flueway baffle
in 2
nd
pass on left side of boiler, hold baffle with
word “Left” readable at the top. Slide baffle in
flueway until position tab touches fins on left side
of 3
rd
pass flueway. To install flueway baffle in 2
nd
pass flueway on right side of boiler, hold baffle
with word “Right” readable at the top. Slide
baffle in flueway until position tab touches fins
on right side of 3
rd
pass flueway.
•
Models MPO-IQ147, MPO-IQ189 and MPO-
IQ231 - To install flueway baffle in 2
nd
pass
flueway on left side of boiler, hold baffle with
word "Left" readable at the top. Slide baffle in
flueway until position tab touches fins on right
side of 2
nd
pass flueway. To install flueway baffle
in 2
nd
pass flueway on right side of boiler, hold
baffle with word "Right" readable at the top. Slide
baffle in flueway until position tab touches fins
on left side of 2
nd
pass flueway.
NOTE:
2
nd
and 3
rd
pass flueway baffle are not
interchangeable.
6.
Close the burner swing door
and securely seal the door
to the boiler front section by reinstalling the hardware and
securing the door using procedure previously outlined in
Paragraph D of this section.
NOTICE
When securing burner swing door make sure door
is drawn-in equally on both sides.
II. PACKAGED BOILER ASSEMBLY - TRIM & CONTROLS (cont'd)
Содержание MPO - IQ
