Setup
28
Document Number 206465-0001
User Guide
Figure 20: Place model material spool into model material carrier
Note:
Model (red) and support (black) carriers are different. The
material guide tubes install on the opposite side. See
Figure
20.
8.
Close the carrier with the material guide in place. Latch both buckles completely (the red tab must
snap in to place on each buckle).
See
Figure 21
.
Note:
Material must protrude 6.35mm (0.25 inch) from the end of
the material guide.
Figure 21: Latching the carrier
Model
Support
