Setup
17
Document Number 206465-0001
User Guide
5.
Open the printer door and remove the substrate and Vapor Corrosion Inhibitor (VCI) emitter and dis-
card. See
Figure 11.
6.
Remove the shipping foam from the Z stage guide rods and recycle. See
Figure 11.
7.
Cut the tie wraps holding the belt retaining clips in place, remove the belt retaining clips and recycle.
See
Figure 11.
Figure 11: Open the chamber door and remove shipping materials
WARNING
The lead screw and guide rods are lubricated with a thin coat of Krytox
grease. Krytox grease can cause skin irritation. Be careful not to get the
grease on your hands or clothing.
Remove belt retaining clips
and recycle.
Remove modeling base with
VCI emitter and discard
Remove shipping foam
from Z stage guide rods
and recycle.
