Setup
19
Document Number 206465-0001
User Guide
Connecting the printer and material bay(s).
1. Connect the material tubes from the material bay(s) to the printer. The material tube with the red stripe
is for the model material and the material tube with the black stripe is for support material. See
Figure
13
.
Note:
If you are using the optional second material bay, the longer
material tubes are for the lower material bay and the shorter
material tubes are for the upper material bay.
Figure 13: Material tube connections
2.
Connect the material bay communication cable(s) from the material bay(s) to the printer.
DO NOT con-
nect the material bay communication cable(s) while the printer is powered on.
See
Figure 14
.
Figure 14: Material bay communication cable
Remove only if
using the optional
material bay
Firmly push tubes
into fittings
