Tuttnauer 5596 SP-1, Руководство по эксплуатации и обслуживанию, Страница: 50 / 120

Page 45 of 101 pages
Doors Number
After entering the language, the display is as follows:
This autoclave has one door, press ØØØ1. Press ENTER and the system moves
on to the next screen.
Door Type
In this model the door is a manual hinged door, the Door Type is ØØØØ. Enter
these values either through the UP/DN keys and then press ENTER, or physically
enter the digits whereby the screen will automatically progress to the next display
after entering the fourth digit.
Atmospheric Pressure
The atmospheric pressure at Sea Level is 100kPa. For every 100m above sea
level, the atmospheric pressure drops 1kPa, and for every 100m below sea level,
the atmospheric pressure increases 1kPa.
If pressure is set correctly, press ENTER and the next screen appears. If pressure
needs to be altered, this may be done either through the digit keypad or the
UP/DN keypads.
Jacket (Jacket Type)
♦
Jacket – the steam to the chamber passes from the jacket press -1
F. O. Mode
This mode enables F.O. calculations, the processing being based on data fed by
two temperature sensors one mounted in the chamber, one on the condense
pipeline.
The F.O. calculation is performed for cycles with Ster. Temp. in the range of
215ºF - 273ºF, especially used in Programs 9-12.
F.O. = 0 (disabled),
F.O. 1= total heating time + total cycle time + cooling time.
F.O. 2 = compensates the difference between heating time, cooling time and
exhaust. Calculates using factor 1.5 of the total accumulated heating and cooling
time and converts that into the equivalent sterilization time.
Temp. F.O. = Determines the temp. at which F.O. calculations should begin.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com