Tuttnauer 5596 SP-1, Руководство по эксплуатации и обслуживанию

Страница: 15 / 120

Page 10 of 101 pages
Analog Inputs for Reading Pressure
The system contains 6 inputs for reading pressure from 4 – 20mA sensors. There
are at least 3 sensors on each ADC.
The pressure reading occurs from inside the chamber, the steam entrance, and
sealed doors.
Each sensor has an output of 4mA. The system allows the measurement range of
the sensor to be set by external software.
Measuring pressure in chamber
The display and printing scale is in psi units.
The measurement range is 1.47 – 48.2 psig absolute.
The resolution measurement and display is 0.14 psig.
The accuracy of the measurement is 1% of of the range, i.e.0.58 psig.
Calibration of the pressure circuit requires a special code.
Measuring jacket pressure
The measurement range is 1.47 – 48.2 psig absolute.
The resolution measurement and display is 0.14 psig.
The accuracy of the measurement is 1% of the range, i.e. 0.58 psig.
Calibration of the pressure circuit requires a special code.
Measuring generator pressure
The measurement range is 14.5 – 87 psia (absolute).
The resolution measurement and display is 0.29 psi.
The accuracy of the measurement is maximum 1%from the range i.e. 0.72 psi.
Calibration of the pressure circuit requires a special code
.
3 Serial Ports
The control system contains 3 serial ports according to the following specifications:
♦
Serial Ports for the connection of up to 2 command panels
(RS485).
♦
1 Serial Port connected to an external PC computer (RS232).
If it will be necessary to convert some functions or to reprogram or to reload the
software of the autoclave from distance, a modem can be connected using above-
mentioned ports. This enables the service technicians to attend the machine from
miles away, using the ADMC software thus allowing full control of the machines.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com