4 The outline of motor control
23
16TYPE Hand box controller
（
PM16-HDX16 16 axis selected control
）
Control a channel that is selected from 16 channels.
1.
Channel indicated LED
It displays the channel that is controlled, and it
displays a channel as Hexadecimal number (0 ~
F).
2.
Channel select switch (useful in local mode
）
Select the channel that want to control by this
switch.
3.
Speed change switch (useful in local mode)
In local mode, you can change the speed of the
channel A, B from HSPD, MSPD and LSPD.
In remote mode, it becomes the STOP button.
(see below)
4.
JOG switch (useful in local mode)
When you press once, it gives the instruction once in the direction (CW or CCW) in
which you move the JOG switch. If press and hold, it continues to operate.
･
About Speed change switch
In remote mode, all of LED H/M/L will light, if the button is pressed and held more
than 3 seconds. And Speed change switch will act as STOP button at this time.
This feature will be canceled, if the button is pressed and held more than 3 seconds,
again.
1
2
4
3
