Trumpf 1604786, Инструкция по эксплуатации, Страница: 83 / 110

Controlling the Operating Table
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
83
Adjusting the
function
Adjusting joints collectively:
1. Arrange accessories on the operating table in such a manner
that they do not collide with other accessories, section
segments or the operating table during positioning.
2. When using the remote control: The displays of the L [i24] and
R [i25] keys must light up (active by default). If only one key
lights up, the other key must be pressed (for example, press the
R key, when L is already selected).
3. Press key [i12] or [i13]. The joints are adjusted together
(synchronously).
If the joints are in different positions, the function automatically
stops once the first joint reaches the level position or end
position.
Adjusting joints individually:
The functions are only available on the remote control.
1. Remove an accessory if it is attached to two joints
simultaneously (e.g. colonoscopy roll).
2. Arrange accessories on the operating table in such a manner
that they do not collide with other accessories, section
segments or the operating table during positioning. Adjust the
spreadable leg sections in such a manner that they do not
overlap one another.
3. Press key L [i24] for the left joint or R [i25] for the right joint. The
display of the selected key will light up.
4. Press key [i12] or [i13]. Only the left or right joint moves. You
will hear a warning tone (shrill single tone) once the joints
move towards each other.
5. After a few seconds without pressing any key, it will
automatically switch back to the collective adjustment of the
joints. The indicators for the L [i24] and R [i25] keys are
illuminated.
[i12] Leg section joint up
[i13] Leg section joint down
[i24] Select left joint (only remote control)
[i25] Select right joint (only remote control)
[i12] Leg section joint up
[i13] Leg section joint down
[i24] Select left joint (only remote control)
[i25] Select right joint (only remote control)