
Troubleshooting
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
101
Tilt cannot be adjusted by more
than 10° when the operating
table is unlocked (no brakes
applied).
OK, for safety reasons tilting is
blocked in drive mode
Lock operating table
Operating table cannot be
unlocked
Tilt not in horizontal position
(< 5°) and/or
Longitudinal travel not in level
position and/or
Lift not in center position
Set tilt to horizontal
Move longitudinal travel to level
position
Move lift to center position
The operating table drive mode
does not operate with wired
remote control
Power cable connected to the
operating table
Disconnect the operating table
from the line power
Leg sections not adjusted down
far enough
Longitudinal travel too far toward
the head end
Adjust longitudinal travel toward
the foot end
Back section not adjusted down
far enough
Longitudinal travel too far toward
the foot end
Adjust longitudinal travel toward
the head end
Acoustic signal when moving the
table top
Sensor error
Contact Technical Service
Audible signal while leveling if the
leg sections are approaching one
another
Possible risk of collision (signal is
warning)
OK (no error)
Error
Possible cause
Correction
Содержание 1604786
Страница 1: ...TruSystem 7000 Operating Table Instruction manual...
Страница 4: ...4 Instruction manual Operating table TruSystem 7000 1 730 263 11 2016...
Страница 109: ......