Trumpf 1604786, Инструкция по эксплуатации, Страница: 70 / 110

Load Capacity
70
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
18.2 One-part table top
18.2.1 Operating table top with head section, upper back section and leg sections
[28] Head section
[29] Leg sections
[31] Upper back section
1. An upper back section [31] and a head section [28] are
attached at the head end of the operating table top.
2. Leg sections [29] are attached at the foot end of the operating
table top.
3. Patient orientation on the operating table top is as normal.
Permissible load:
Attention, additional accessories reduce the permissible patient
weight.
1000 lbs
(450 kg)
Patient weights of up to 1000 lbs (450 kg) are
possible under the following conditions:
1. The longitudinal travel of the operating table top
must be in level position.
2. The operating table column can be inclined up to
15° about the transverse axis (tilt). Tilt
automatically stops at 15° and is indicated
acoustically by means of a signal tone. Do not
continue to tilt the operating table column after the
intermediate stop is reached.
551 lbs
(250 kg)
A patient weight of up to 551 lbs (250 kg) is possible
without limiting the operating table functions.