Trumpf 1604786, Инструкция по эксплуатации, Страница: 78 / 110

Controlling the Operating Table
78
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
19.3 Level position
Moving to level position means that electrically adjustable
operating table movements travel to a defined initial position in the
following sequence.
1. Combined movement where the motorized joints of the
operating table top, the (reverse) Trendelenburg position and
the tilt are set to horizontal.
2. The longitudinal travel of the operating table top is brought to
its middle position.
Adjusting the
function
1. Set the spreadable leg sections so that they do not overlap
one another.
2. Arrange accessories on the operating table in such a manner
that they do not collide with other accessories, section
segments or the operating table during positioning.
3. Press key [i11]. The final level position is indicated when an
acoustic signal sounds. Indicator [i11] on the column keypad
lights up. The status symbol for the level position in the remote
control display is visibly white.
You will hear a warning tone (shrill single tone) once the leg
section joints move towards each other.
4. Manually place the mechanical joints of the section segment
in the (horizontal) level position (aligning the gear markings).
CAUTION!
Risk of personal injury. Hazard to the patient caused due to
sloping position!
When moving to level position, larger patient incline positions can
occur compared to the initial position. Monitor patient position and
stop the function before a hazardous situation arises.