Triumph Speed Triple 1200 RS Скачать руководство пользователя

Страница: 145 / 184

Maintenance

145

Warning

Lithium-ion batteries are regarded as

Class 9 hazardous products.
DO NOT incinerate a lithium-ion

battery.
DO NOT crush a lithium-ion battery.
DO NOT break open a lithium-ion

battery.
DO NOT dispose of a lithium-ion

battery in usual household waste.
DO NOT bury a lithium-ion battery in

the ground.
DO NOT send a damaged lithium-ion

battery by post or carrier.
Failure to do so may lead to a serious

environmental issue, personal injury or

death.

Warning

Lithium-ion batteries are regarded as

Class 9 hazardous products and must

be treated as such.
If a lithium-ion battery becomes

damaged, including a bulging or

broken casing and stripped out

terminals, you MUST take it to a

Hazardous Waste collection point.
Always check with your local authority

if a lithium-ion battery can be put into

the general waste collection as they

are regarded as hazardous waste.

Warning

Never attempt to open, disassemble, or

pierce a lithium-ion battery.
Never strike, throw, or subject the

battery to severe physical shock.
These actions may cause a lithium-

ion battery to vent gas at a very high

temperature.
A lithium-ion battery will vent

high temperature gas until it

has exhausted all of the internal

components, causing irreparable

damage to the motorcycle and or

serious personal injury or death.

Battery Installation

Warning

Make sure the motorcycle is stabilised

and adequately supported.
A correctly supported motorcycle will

help prevent it from falling.
An unstable motorcycle may fall,

causing injury to the operator or

damage to the motorcycle.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Похожие инструкции для Speed Triple 1200 RS

Бренды по названию

Популярные бренды

Triumph Speed Triple 1200 RS, Руководство пользователя

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Похожие инструкции для Speed Triple 1200 RS

Бренды по названию

Популярные бренды