Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 93

Страница: 93 / 184

How to Ride the Motorcycle

Warning

If the optimised cornering ABS is not

functioning, the ABS warning light will

illuminate and a warning message is

shown in the display.
In this situation, the ABS will continue

to operate but without the optimised

cornering function, provided that:
- There are no other ABS faults.
- The ABS has not been disabled by

the rider.

Do not continue to ride for longer than

is necessary with the warning light

illuminated. In the event of a fault,

contact an authorised Triumph dealer

as soon as possible to have the fault

checked and rectified.
In this situation, braking too hard

during cornering may result in loss of

motorcycle control and an accident.

Parking

Warning

The engine and exhaust system will be

hot after riding.
DO NOT park where pedestrians

and children are likely to touch the

motorcycle.
Touching any part of the engine or

exhaust system when hot may cause

unprotected skin to become burnt.

Warning

Petrol is extremely flammable and can

be explosive under certain conditions.
If parking inside a garage or other

structure, be sure it is well ventilated

and the motorcycle is not close to

any source of flame or sparks. This

includes any appliance with a pilot

light.
Failure to follow the above advice may

cause a fire resulting in damage to

property or personal injury.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 93 / 184

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы: