Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 161

Страница: 161 / 184

Cleaning and Storage

161

Care of Gloss Paintwork

Gloss paintwork should be washed

and dried as described previously,

then protected using a high quality

automotive polish. Always follow the

manufacturer’s instructions and repeat

regularly to maintain your motorcycle’s

appearance.

Care of Matt Paintwork

Matt paintwork requires no greater care

than that already recommended for

gloss paintwork.
• Do not use any polish or wax on

matt paintwork.

• Do not try and polish out scratches.

Aluminium Items - not

Lacquered or Painted

Items such as brake and clutch levers,

wheels, engine covers, engine cooling

fins, upper and lower yokes and

throttle bodies on some models must

be correctly cleaned to preserve their

appearance. Please contact your dealer

if you are unsure which components on

your motorcycle are aluminium parts

not protected by paint or lacquer, and

for guidance on how to clean those

items.
Use a proprietary brand of aluminium

cleaner which does not contain abrasive

or caustic elements.
Clean aluminium items regularly,

in particular after use in inclement

weather, where the components must

be hand washed and dried each time

the machine is used.
Warranty claims due to inadequate

maintenance will not be allowed.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 161 / 184

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы: