Triumph Speed Triple 1200 RS Скачать руководство пользователя

Страница: 97 / 184

Accessories, Loading and Passengers

The addition of accessories and carriage

of additional weight can affect the

motorcycle's handling characteristics

causing changes in stability and

necessitating a reduction in speed. The

following information has been prepared

as a guide to the potential hazards of

adding accessories to a motorcycle and

carrying passengers and additional

loads.

Accessories

Warning

Do not install accessories or carry

luggage that impairs the control of the

motorcycle.
Make sure that you have not

adversely affected any lighting

component, road clearance, banking

capability (i.e. lean angle), control

operation, wheel travel, front fork

movement, visibility in any direction, or

any other aspect of the motorcycle's

operation.

Warning

Owners should be aware that the

only approved parts, accessories

and conversions for any Triumph

motorcycle are those which carry

official Triumph approval and are fitted

to the motorcycle by an authorised

dealer.
In particular, it is extremely hazardous

to fit or replace parts or accessories

whose fitting requires the dismantling

of, or addition to, either the electrical

or fuel systems and any such

modification could cause a safety

hazard.
The fitting of any non-approved

parts, accessories or conversions may

adversely affect the handling, stability

or other aspect of the motorcycle

operation that may result in an

accident causing injury or death.

Triumph does not accept any liability

whatsoever for defects caused by

the fitting of non-approved parts,

accessories or conversions or the fitting

of any approved parts, accessories or

conversions by non-approved personnel.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Похожие инструкции для Speed Triple 1200 RS

Бренды по названию

Популярные бренды

Triumph Speed Triple 1200 RS, Руководство пользователя

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Похожие инструкции для Speed Triple 1200 RS

Бренды по названию

Популярные бренды