Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 94

Страница: 94 / 184

How to Ride the Motorcycle

Warning

Do not park on a soft or steeply

inclined surface.
Parking under these conditions may

cause the motorcycle to fall over

causing damage to property and

personal injury.

To park the motorcycle:
• Select neutral and turn the ignition

switch to the OFF position.

• Select first gear.
• Lock the steering to help prevent

theft.

• Always park on a firm, level surface

to prevent the motorcycle from

falling. This is particularly important

when parking off-road.

• When parking on a hill, always

park facing uphill to prevent the

motorcycle from rolling off the

stand. Engage first gear to prevent

the motorcycle from moving.

• On a lateral (sideways) incline,

always park such that the incline

naturally pushes the motorcycle

towards the side stand.

• Do not park on a lateral (sideways)

incline of greater than 6° and never

park facing downhill.

• Do not leave the switch in the P

position for long periods of time as

this will discharge the battery.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 94 / 184

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы: