Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 55

Страница: 55 / 184

General Information

• The relevant trip meter information

is then shown.

To reset a trip meter:
• Select the trip meter to be reset.
• Press and hold the joystick centre

for more than one second.

• The trip meter will then be reset.

Journey - Trip Settings

The Trip Settings menu allows the

trip meters to be reset manually or

automatically.

To reset the trip meters:
• Push the joystick left/right to select

the Trip Settings tab.

• Push the joystick down/up to select

the required trip meter. Press the

joystick centre to confirm.

• Push the joystick down/up to select

the required reset option and press

the joystick centre to confirm.

Trip Settings Options

Auto

This option reset each trip

meter after the ignition has

been switched off for the

selected set time; 1, 2, 4, 8,

12 or 16 hours.

Manual

This option only resets the

selected trip meter when

the rider manually resets

the selected trip meter.

Journey - Lap Timer

The Lap Timer menu allows a certain

distance/lap to be timed and compared

against a previously timed lap.

To start a lap:
• A short press on the joystick centre

starts a new lap. The lap counter

will start to count the first lap. This

is shown as THIS LAP.

• A long press (longer than two

seconds) on the joystick centre will

stop the lap timer, clear the stored

data and start a new lap time.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 55 / 184

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы: