Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 39

Страница: 39 / 184

General Information

If a riding mode is edited (other than

the RIDER mode), the icon will change as

shown below.

Description

Default Icon

Rider Edited

Icon

RAIN

ROAD

SPORT

TRACK

RIDER

Each riding mode is adjustable. For more

information, see page 50.
Availability of the ABS, MAP and TC

setting options vary between models.

Riding Mode Selection

Warning

The selection of riding modes whilst

the motorcycle is in motion requires

the rider to allow the motorcycle to

coast (motorcycle moving, engine

running, throttle closed, clutch lever

pulled in and no brakes applied) for a

brief period of time.
Riding mode selection whilst the

motorcycle is in motion should only be

attempted:
- At low speed
- In traffic free areas
-

On straight and level roads or

surfaces

- In good road and weather conditions
-

Where it is safe to allow the

motorcycle to briefly coast.

Riding mode selection whilst the

motorcycle is in motion MUST NOT be

attempted:
-  At high speeds
-  Whilst riding in traffic
-  During cornering or on winding roads

or surfaces

-  On steeply inclined roads or surfaces
-  In poor road/weather conditions
-

Where it is unsafe to allow the

motorcycle to coast.

Failure to observe this important

warning will lead to loss of motorcycle

control and an accident.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 39 / 184

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы: