manualshive.com logo in svg

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 182 / 184

Поделиться
Скачать
Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 182

Approval Information

182

Industry Canada Statement

Under Industry Canada regulations, this radio transmitter may only operate using 

an antenna of a type and maximum (or lesser) gain approved for the transmitter by 

Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain 

should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not 

more than that necessary for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause 

undesired operation of the device.

Tyres

With reference to the Pneumatic Tyres and Tubes for Automotive Vehicles (Quality 

Control) Order, 2009, Cl. No. 3 (c), it is declared by M/s. Triumph Motorcycles Ltd. 

that the tyres fitted on this motorcycle meet the requirements of IS 15627: 2005 and 

comply with the requirements under Central Motor Vehicle Rules (CMVR), 1989.

Smart Keyless System Approval Addendum

Smart Keyless System Approval

The Smart Keyless system complies with IC-RSS-210 Industry Canada. Operation is 

subject to the following conditions:
1.  This device may not cause harmful interference.
2.  This device must accept interference received, including interference that may 

cause undesired operation.

Canada IC: 10176A-008
Model No. A-0794G01
Under Industry Canada regulations, this radio transmitter may only operate using 

an antenna of a type and maximum (or lesser) gain approved for the transmitter by 

Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain 

should be so chosen that the Equivalent Isotropically Radiated Power (EIRP) is not 

more than that necessary for successful communication.

Содержание Speed Triple 1200 RS

























































































































































































Отзывы:

Нет отзывов