Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 164

Страница: 164 / 184

Cleaning and Storage

164

Seat Care

Caution

Use of chemicals or high pressure

spray washers is not recommended for

cleaning the seat.
Using chemicals or high pressure

spray washers may damage the seat

cover.

To help maintain its appearance, clean

the seat using a sponge or cleaning

cloth with soap and water.

Windscreen Cleaning

(if fitted)

Warning

Never attempt to clean the windscreen

while the motorcycle is in motion as

releasing the handlebars may cause

loss of motorcycle control and an

accident.
Operation of the motorcycle with a

damaged or scratched windscreen

will reduce the rider's forward vision.

Any such reduction in forward vision

is dangerous and may lead to loss of

motorcycle control and an accident.

Caution

Corrosive chemicals such as battery

acid will damage the windscreen.

Never allow corrosive chemicals to

contact the windscreen.

Caution

Products such as window cleaning

fluids, insect remover, rain repellent,

scouring compounds, petrol or strong

solvents such as alcohol, acetone,

carbon tetrachloride, etc. will damage

the windscreen.
Never allow these products to contact

the windscreen.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 164 / 184

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы: