Triumph Speed Triple 1200 RS Скачать руководство пользователя

Страница: 146 / 184

Maintenance

146

Warning

Make sure the battery busbar, positive

and negative terminals do not come

into contact with each other.
Do not reverse the positive (+) or

negative (-) terminals.
Shorting the positive and negative

terminals, may cause the battery to

vent gas at a very high temperature.
Venting high temperature gas will

cause irreparable damage to the

motorcycle and or serious personal

injury or death.

To install the battery:
• Fit the battery into the battery case.
• Refit the battery strap.

B01221_3

1. Battery strap
2. Hook

• Reconnect the battery, positive (red)

lead. Tighten the terminal to 4.5 Nm.

• Apply a light coat of grease to the

terminal to prevent corrosion.

B01222_2

1. Battery positive lead cover clip
2. Battery positive lead busbar cover cap

• Cover the positive terminal with the

busbar cover cap.

B01221

1. Battery positive lead busbar cover cap
2. Battery positive lead cover clip

• Fit the front brace, secure with the

two fixings and tighten to 8 Nm.

Содержание Speed Triple 1200 RS

























































































































































































Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Похожие инструкции для Speed Triple 1200 RS

Бренды по названию

Популярные бренды

Triumph Speed Triple 1200 RS, Руководство пользователя

Результаты поиска

Содержание Speed Triple 1200 RS

Отзывы:

Похожие инструкции для Speed Triple 1200 RS

Бренды по названию

Популярные бренды