manualshive.com logo in svg

Triumph Speed Triple 1200 RS, Руководство пользователя, Страница: 149 / 184

Поделиться
Скачать
Triumph Speed Triple 1200 RS Скачать руководство пользователя страница 149

Maintenance

149

B01271_1

1

1.  Front fuse box location

Refitting the Fuel Tank

 Warning

Make sure the motorcycle is stabilised 

and adequately supported.
A correctly supported motorcycle will 

help prevent it from falling.
An unstable motorcycle may fall, 

causing injury to the operator or 

damage to the motorcycle.

To refit the fuel tank:
•  Lower the front of the fuel tank.

•  Fit the fuel tank bracket fixings to 

the frame and tighten to 10 Nm.

B01272

2

1

1.  Fuel tank
2. Fixings

•  Fit the front fixings to both sides of 

the rear bracket.

•  Tighten the rear bracket front and 

rear fixings to 9 Nm.

B01273

4

3

2

1

1.  Rear bracket front fixing (left hand 

shown)

2.  Rear bracket rear fixing (left hand shown)
3.  Stop screw (left hand shown)
4.  Rear bracket

Содержание Speed Triple 1200 RS

























































































































































































Отзывы:

Нет отзывов