manualshive.com logo in svg

TrimTrac ProE Locator, Техническое руководство


Поделиться
Скачать
background image

 

TrimTrac ProE Locator Technical Manual v2.0e 

40

 

Table 12.  GSM Polling Options 

 
If communication with the device is required at all times, whether the device is 
moving or is at rest, then the Anytime Polling feature can be set “2=OnDemand”.  
The device will be able to receive and process messages sent from the server 
application in virtual real-time, regardless of which state the device may be in at 
the time, except when the device itself is already transmitting a message. 
As noted above, however, leaving the GSM modem on continuously to support 
this Anytime Polling OnDemand capability has a negative impact on power 
consumption.  To help mitigate this parasitic power drain, it may be useful to 
cycle the GSM modem on and off periodically while the device is at rest.  This is 
the purpose of the Duty-Cycled setting for Anytime Polling.  When enabled, 
Duty-Cylced polling turns off the GSM modem for some pre-defined period while 
in the IDLE State (i.e. at rest with no motion) and then turns it back on 
momentarily to check for any messages sent by the server application.  While the 
device is in motion, the GSM modem remains on continuously. 
The In-Motion Polling feature is used when polling is to be enabled ONLY while 
motion is being sensed.  If no motion is occurring and the device is in the IDLE 
State, then the GSM modem will be powered off except as required to process 
normal IDLE state messages.  While in motion, however, the GSM modem will 
remain powered up, thereby allowing continuous connection to the GSM network.   
The In-Motion Polling feature is submissive to Anytime Polling, meaning that if 
Anytime Polling is enabled, be it set to OnDemand or Duty-Cycled, then the 
GSM modem will remain powered during motion regardless of how the In-
Motion Polling feature is set. 
If neither Anytime Polling nor In-Motion Polling is enabled, then the device can 
only be query, polled, or otherwise communicated with while it is in the QUERY 
state only. 
A popular combination when using SMS messaging is to have In-Motion Polling 
set to “1=OnDemand” and  Anytime Polling set to “1=Duty Cycled while in 
IDLE State”.  This will allow continuous communication with any device while it 
is motion, but then cycle the GSM modem on and off while in the IDLE State to 
minimize power consumption but still allowing more frequent polling of the 
device than would otherwise be afforded by the expiration of IDLE Timeout, T1, 
alone. 
Duty cycling the GSM modem while in the IDLE State may result in excessive 
GPRS data charges since some carriers charge a minimum number of Bytes (i.e. 
1k Bytes) each time a GPRS session is established regardless of how much user 
data is actually transmitted during the current GPRS session.  Therefore, leaving 
the GSM modem on for as long as possible by setting this Anytime Polling to 
2=OnDemand may be preferred when using GPRS communications, even if doing 
so results in much higher power consumption.   

Содержание ProE Locator










































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProE Locator

Quectel EC200 Series Application Note preview
EC200 Series
Бренд: Quectel Страницы: 28
Quectel EG21-G Hardware Design preview
EG21-G
Бренд: Quectel Страницы: 96
FSK TX Cellular Plus Installation And Programming Manual preview
TX Cellular Plus
Бренд: FSK Страницы: 16
Ebyte E32 Series User Manual preview
E32 Series
Бренд: Ebyte Страницы: 24
Zte ME3000_V2 At Command Manual preview
ME3000_V2
Бренд: Zte Страницы: 82

Бренды по названию

Популярные бренды

Загрузить еще бренды