manualshive.com logo in svg

TrimTrac ProE Locator, Техническое руководство


Поделиться
Скачать
background image

 

 

Corporate Office  

 
Trimble Navigation Limited  
935 Stuart Avenue  
Post Office Box 3642  
Sunnyvale, CA 94086-3642 U.S.A.  
Phone: +1-408-481-8940 
              1-800-545-7762  

www.trimble.com

  

www.trimtrac.com

 

 

Copyright and Trademarks  
 

© 1997-2007, Trimble Navigation Limited. All rights 
reserved.  
 
Trimble, the Globe & Triangle logo, and TrimTrac are 
trademarks of Trimble Navigation Limited, registered 
in the United States and in other countries.  All other 
trademarks are the property of their respective owners.  
The Circle & Parallelogram is a trademark of Trimble 
Navigation Limited. 
 

Release Notice  
 

This document is release 2.0e of the TrimTrac

TM

 Pro 

Locator Technical Manual, Part Number 80200-00-
UG.    
 
T

HIS MANUAL IS INTENDED FOR USE BY SYSTEM 

INTEGRATORS

,

 SERVICE PROVIDERS AND APPLICATION 

DEVELOPERS 

(

COLLECTIVELY

,

 

“R

ESELLERS

”).

  

I

T IS NOT 

INTENDED FOR END

-

USERS OF THE 

T

RIM

T

RAC 

P

RO

E.

  

A

NY END

-

USER DOCUMENTATION IS TO BE PREPARED 

AND FURNISHED BY THE 

R

ESELLERS

. 

 
The following Product Limited Warranty gives 
Resellers specific legal rights. You may have others, 
which vary from state/jurisdiction to state/jurisdiction.  
 

Patents  
 

US Patents 6,801,853; 5,187,450; 5,311,149; 
5,402,347; 5,564,098; 5,590,043; 5,592,173; 
6,115,595; 6,898,234; and 6,990,140 apply. 

  
Product Limited Warranty 
 

Subject to the terms and conditions set forth herein, 
Trimble Navigation Limited (

“Trimble”

) makes the 

following warranty only to its Resellers who purchase 
the TrimTrac hardware product (

“Product”

) directly 

from Trimble: for a period of one (1) year from the 
date of shipment from Trimble, the Product will 
substantially conform to Trimble’s standard published 
specifications for the Product and the Product 
hardware will be substantially free from defects in 
materials and workmanship.  The foregoing warranty 
shall not apply to embedded software/firmware 
components. 
 

T

HIS 

P

RODUCT 

L

IMITED 

W

ARRANTY IS PROVIDED TO 

R

ESELLERS AND TO 

R

ESELLERS ONLY

.

   

R

ESELLER IS 

SOLELY RESPONSIBLE FOR ANY AND ALL WARRANTIES 
MADE TO ITS CUSTOMERS

,

 AND 

T

RIMBLE MAKES NO 

WARRANTIES

,

 EXPRESS OR IMPLIED

,

 AND SHALL HAVE NO 

OBLIGATIONS OR LIABILITY TO 

R

ESELLER

’

S CUSTOMERS 

OR END

-

USERS OF THE 

P

RODUCT

.

  

R

ESELLER SHALL NOT 

MAKE ANY REPRESENTATIONS OR WARRANTIES ON 

T

RIMBLE

’

S BEHALF

,

 AND SHALL FULLY INDEMNIFY

,

 

DEFEND AND HOLD 

T

RIMBLE HARMLESS FROM ANY 

BREACH OF THE FOREGOING

. 

 
I

F 

R

ESELLER DISTRIBUTES 

P

RODUCT TO END

-

USER 

CUSTOMERS

,

 

R

ESELLER SHALL BE SOLELY RESPONSIBLE 

FOR PREPARING AND PROVIDING 

P

RODUCT WARRANTIES 

AND 

P

RODUCT LITERATURE TO END

-

USERS

. 

 

Warranty Remedies 
 

If the Product fails during the warranty period for 
reasons covered by this Product Limited Warranty and 
Reseller notifies Trimble of such failure during the 
warranty period, Trimble at is option will repair OR 
replace the nonconforming Product, OR refund the 
purchase price paid by Reseller for the Product, 
provided that Reseller returns the Product to Trimble 
in accordance with Trimble’s standard return material 
authorization procedures or as otherwise instructed by 
Trimble. 
 

Warranty Exclusions and Disclaimers 
 

The foregoing Product Limited Warranty shall only 
apply in the event and to the extent that (i) the Product 
is properly and correctly installed, configured, 
interfaced, maintained, stored and operated in 
accordance with Trimble’s specifications, and (ii) the 
Product is not modified or misused.  This Product 
Limited Warranty shall not apply to, and Trimble shall 
not be responsible for, defects or performance 
problems resulting from: (a) the combination or 
utilization of the Product with hardware or software 
products, information, data, systems, interfaces, 
services or devices not made, supplied or specified by 
Trimble; (b) the operation of the Product under any 
specifications other than, or in addition to, Trimble’s 
standard published specifications for the Product; (c) 
the unauthorized installation, modification or use of 
the Product; (d) damage caused by: accident, lightning 
or other electrical discharge, water immersion or 
spray, or exposure to environmental conditions for 
which the Product is not intended; or (e) normal wear 
and tear on consumable parts, including by way of 
example and without limitation, batteries.  T

RIMBLE 

DOES NOT WARRANT OR GUARANTEE THE RESULTS 
OBTAINED THROUGH THE USE OF THE 

P

RODUCT

. 

 
T

HE FOREGOING TERMS OF THE 

P

RODUCT 

L

IMITED 

W

ARRANTY STATE 

T

RIMBLE

’

S ENTIRE LIABILITY

,

 AND 

R

ESELLER

’

S EXCLUSIVE REMEDIES

,

 RELATING TO USE 

AND PERFORMANCE OF THE 

P

RODUCT

.

   

E

XCEPT AS 

Содержание ProE Locator










































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProE Locator

sauter LET4104RK102 Manuallines For The Electrician preview
LET4104RK102
Бренд: sauter Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды