manualshive.com logo in svg

TrimTrac ProE Locator, Техническое руководство

Поделиться
Скачать
TrimTrac ProE Locator Скачать руководство пользователя страница 107

 

TrimTrac ProE Locator Technical Manual v2.0e 

89

 

2.

 

When the unit enters the IDLE State and no motion has been detected, it starts 
the IDLE Timeout, T1, and waits for a TriggerType event to occur.  (LED 
OFF, unless Anytime Polling mode is set “2=Anytime OnDemand”.) 

3.

 

Upon the occurrence of a TriggerType event, the unit will wake up and 
transition out of the IDLE state based upon the TriggerType event and the 
current configuration settings as follows:  

•

 

Upon expiration of the IDLE Timeout, T1, the TriggerType is set 
“0=IDLE Timeout, T1”, the TrimTrac ProE will transition to the 
STATUS state (bypassing the FIX state). 

•

 

If motion is detected while in the IDLE state, the TrimTrac ProE will 
activate the Static Motion Filter Timeout, T7, and apply the Static 
Motion Filter Counter, N3.  (Rapid LED Blinking)   
If there is sufficient continued motion, the TriggerType becomes set 
“1=Motion Detected” and the unit will transition to the FIX State if the 
Motion Report Flag is set “0=None” or to the STATUS state if the 
Motion Report Flag is set “1=Report IDLE Motion”.  If there is 
insufficient motion to satisfy the Static Motion Filter Counter, N3, 
while the Static Motion Filter Timeout, T7, is running, then the unit 
will return to the IDLE state sleep mode and wait for a subsequent 
TriggerType event to occur. 

•

 

If an alert status is in some state other than “0=Normal” or “4=Monitor 
Activated” or upon an initial Geofence violation, then the TriggerType 
shall be set “2=Exception Report Alert” and the device shall transition 
from the IDLE State in accordance with its current configuration.  See 
the section below for more details on input alert processing. 

•

 

If the Anytime Polling is set to “2=Anytime OnDemand”, the unit 
keeps the GSM modem operational and the device is ready to receive 
messages from the sever at any time while the IDLE Timeout, T1, is 
running (Continuous Rapid LED Blinking). Upon receipt of any data 
messages, the TriggerType is set “3=Query” and the unit transitions 
immediately to the QUERY state to process any such received 
messages. 

•

 

If the Anytime Polling is set to “1=Duty-Cycled”, the TrimTrac ProE 
will power duty-cycle the GSM modem on and off during the IDLE 
state.  Each time the Polling Duty-Cycle Frequency, T19, timer 
expires, the GSM modem will power up and the Polling Duty-Cycle 
On-Time, T20, will start (Rapid LED Blinking).  The GSM modem 
hardware will remain on until the expiration of Polling Duty-Cycle 
On-Time, T20, or a query message is received. Upon receipt of any 
query messages, the TriggerType is set “3=Query” and the unit 
transitions immediately to the QUERY state to process any such 
received messages; else it goes back into IDLE sleep until the next 

Содержание ProE Locator










































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды