manualshive.com logo in svg

TrimTrac ProE Locator, Техническое руководство


Поделиться
Скачать
background image

 

TrimTrac ProE Locator Technical Manual v2.0e 

87

 

General Alert Handling

 

Unless the alert mode (as opposed to “alert status”) is configured as “3=Monitor-
only”, alerts are processed in descending order of priority.  High Priority Alerts, 
for instance, will always take precedence over Medium and Low Priority Alerts 
and so on.  Other than having their status included in any outgoing data messages, 
lesser priority alert alarms are ignored until all higher priority alerts have been 
either cleared to “0=Normal” or set “3=Acknowledged”.  The status of alerts 
configured in the “3=Monitor-only” mode will be included in all STATUS_MSG 
and REPORT_POS messages, but activation of any such monitored alerts will not 
in and by themselves result in new message transmissions. 
When a VAM or Control Module equipped TrimTrac ProE detects activation of a 
switch or device, loss of external power or tampering with the external wiring, it 
will set the appropriate priority alert status to “1=Activated”, unless the mode of 
the alert is set to “3=Monitor-only”, in which case, the alert status will be set 
“4=Monitor Activated”.  The one exception to this, as more fully described 
below, is a Low Priority Alert for which the TrimTrac ProE needs to also detect 
motion, in addition to activation of the switch, before the Low Priority Alert 
status is set “1=Activated” or “4=Monitor Activated”. 
Resetting of the local switch or device will not reset any activated alert unless the 
TrimTrac ProE has also received a SET_ALERT_STATE message (See page 
147) or if the particular alert mode has been set “3=Monitor-only”.   
Furthermore, activated or acknowledged alerts can only be cleared back to 
“0=Normal” after the fault or monitored device has been restored to normal AND 
the TrimTrac ProE has received the appropriate SET_ALERT_STATE message 
or if the particular alert mode has been set “3=Monitor-only”.  This will help 
guard against an unauthorized person disabling the TrimTrac ProE or the Vehicle 
Adapter or Control Module inputs.  Alerts whose modes are set to “3=Monitor-
only” will have their status set automatically back to 0=Normal without a 
SET_ALERT_STATE message being received; provided, however, that the fault 
or activated device has been returned to its “normal” condition. 
Whenever an alert changes to “1=Activated” from “0=Normal” (and all higher 
priority alerts, if any, are set to either “0=Normal” or “3=Acknowledged” and the 
activated alert mode is not otherwise disabled or set “3=Monitor-only”), the 
TrimTrac ProE will transition from its current state as follows: 

1.

 

If HPA Status becomes set “1=Activated”, then terminate the current state 
and go to STATUS immediately; else 

2.

 

If MPA Status becomes set “1=Activated”, then, if not in TRANSMIT 
state, terminate the current state and go to STATUS immediately.  If in 
TRANSMIT, then go to STATUS upon completion of current 
TRANSMIT state (Note:  This allows the device to complete sending any 
current messages prior to processing the new MPA); else 

3.

 

If LPA Status becomes set “1=Activated”, then, if not in FIX or 
TRANSMIT state, terminate the current state and go to STATUS 

Содержание ProE Locator










































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProE Locator

Ebyte E28-2G4M12S User Manual preview
E28-2G4M12S
Бренд: Ebyte Страницы: 11
Ebyte E32-170T30D User Manual preview
E32-170T30D
Бренд: Ebyte Страницы: 21
Yuga CLM920_AC3 Usage Manual preview
CLM920_AC3
Бренд: Yuga Страницы: 66
Ebyte E18 Series User Manual preview
E18 Series
Бренд: Ebyte Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды