Control panel SP231
Configuration of control panel operation
©1997-2015 Trikdis
20
www.trikdis.com
4)
Setup an inserted SIM1 card GSM network parameters. Command to set operator parameters:
PSW XXXXXX ˽ 12 ˽ APN# LOGIN# PSW###
PSW XXXXXX – beginning of SMS command and its password, 12 – changing network parameters
command, APN – gateway name (up to 50 symbols), LOGIN – user name (up to 29 symbols), PSW –
user password (up to 29 symbols), # - symbol to end value.
Example:
“PSW123456 12 gprs.net#web#web###”
If network does not have user name nor password, fields must be left empty.
Example:
“PSW123456 12 gprs.net#####”
5)
Connection to the remote server must be enabled in a control panel. Command to enable connection:
PSW XXXXXX ˽ 94 ˽ 1
PSW XXXXXX – beginning of SMS command and its password, 94 – connection to the remote server
command, 1 – connection enabling value (0 – to disable).
Example:
“PSW123456 94 1”
6)
It is required to know IMEI address of Control Panel. IMEI address can be found on product package or
it can be requested by SMS command:
PSWXXXXX ˽ 97 ˽ 5
PSW XXXXXX – beginning of SMS command and its password, 97 ˽ 5 – request about GSM field
strength, modem IMEI number and control panel software version.
Example:
„PSW123465 97 5“
6.1.2.2
Remote log on through TrikdisConfig
1)
Make sure that the control panel is connected to supply source and in operation.
2)
Start TrikdisConfig software.
3)
At the field Remote access, in the field Unique ID enter the control panel GSM/GPRS modem IMEI address.
IMEI address is provided on the product package.
4)
In the adjacent field System Name enter the desired name to the module.
5)
Press Configure. After successful connection the settings shall be saved.
6.1.3
Changing of settings by SMS messages
Communication by SMS messages is designed for monitoring and control of the alarm system. The list of
commands sent by SMS messages see 7 “Programming and control by SMS messages”.
To activate this function, perform the following actions:
1)
Insert the SIM cards, which are already registered with the GSM network provider, into the SIM card
holders.
2)
Complete adding phone number to user command as instructed in 6.1.2.1 GPRS communication
settings the third point in a list. Because only from listed numbers it is available to use all SMS
commands.
