TRENDnet TEW-659BRN, Руководство пользователя

Страница: 43 / 97

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-659BRV
40
VPN Router A Configuration (Server Mode)
Configuration > Security Setting >VPN-L2TP Server
1. Log into your router management page (see “Access your router management page”
on page 50 ).
2. Click on
Configuration at the top of the page, click on Security Setting , and click on
VPN-L2TP Server .
3. Next to
VPN-L2TP Server
, check the
Enable
option to enable the L2TP server.
4. Next to
Server virtual IP , enter the LAN IP address of your router.
Note:
The LAN IP address of your router is automatically entered therefore, it is
recommended to leave this setting unchanged.
5. Enter the IP address range to assign to L2TP VPN clients.
Note:
Please ensure that this range does not conflict with your DHCP server range. If you
have not changed your LAN IP settings or DHCP server range, then you can leave hese
settings at default. Router default DHCP server range: 192.168.10.101-192.168.10.199
• IP Pool Start Address – Changes the starting address for the L2TP VPN server
range. (e.g. 192.168.10. 10 )
• IP Pool End Address – Changes the last address for the L2TP VPN server range.
(e.g.
192.168.10. 100 )
6. Next to
Authentication Protocol , check MS_CHAP and MS_CHAPv2 .
7. Next to
MPPE Encryption Mode , check the Enable option.
8. Next to
Encryption Length , to ensure highest compatibility, check 40 bits , 56 bits , and
128 bits .
9. Under
User Accounts next to ID 1 , enter the User Name and Password used by L2TP
VPN clients to authenticate.
Note: The same account can be used by multiple L2TP VPN clients.
10. Click Save at the bottom of the page to save the changes.
Note: If you would like to discard the changes, click Undo before you click Save . Clicking
Refresh
will reload the page. Clicking
L2TP Client
will bring you to the
L2TP Client
mode
configuration page.