TRENDnet TEW-659BRN, Руководство пользователя

Страница: 91 / 97

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-659BRV
88
Connecting to your router using the built-in PPTP VPN client software
Note: Below are the examples according to the examples provided in the Virtual Private
Networking PPTP section. Please ensure that your VPN client computer is able to access
the Internet from a remote location.
Windows 7
1. Click Start and then click Control Panel.
2. In the Control Panel window, click on Network and Sharing Center.
3. Under Change your networking settings, click on Set up a new connection or
network .
4. In the window, click on
Connect to a workplace
and then click
Next
.
5. In the window, click on
Use my Internet Connection (VPN) .
6. Next to Internet address, enter the remote router WAN (Internet) IP address and then
click Next .
7. Enter the user name and password account information you configured in your router
and check Show characters to verify and Remember this password to save the
credentials. Click Connect .
8. Your computer will attempt to connect to the PPTP VPN server (router).
9. If successful, you will receive a message that indicates you are connected.
10. To verify connectivity, you can use the ping connectivity test. Click Start + R key
at the same time to bring up the run command window. Type
cmd
in the run command
window and click OK . In the command prompt, type
ping <IP address>
of remote
computer or device over the VPN. If you receive replies, the connectivity is successful. If
you receive time outs, there may problems with IP configuration or firewall/security
settings of the remote computer or device you are trying to communicate.