TRENDnet TEW-659BRN, Руководство пользователя

Страница: 45 / 97

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-659BRV
42
o
NAT (Network Address Translation) – This will enable NAT over the
VPN tunnel in order to access the Internet.

If the LAN IP network of both VPN routers is the same (e.g.
192.168.10.1 / 255.255.255.0), then leave the NAT option
disabled. Note:
It is strongly recommended that the LAN IP
networks on both VPN routers are different.
 If the LAN IP network of both VPN routers is different, then
enable the NAT option.
Based on the example, the client settings will be the following:
10. Click Save at the bottom of the page to save the changes.
Note: If you would like to discard the changes, click Undo before you click Save . Clicking
Refresh will reload the page.
Under Connection Status, click Connect to connect the L2TP VPN client.
You can also click Disconnect to disconnect the L2TP VPN client.
GRE (Generic Routing Encapsulation)Tunneling
Site-to-Site GRE Tunnel
Configuration > Security Setting > GRE Tunnel
To configure a Site-to-Site GRE tunnel between two routers:
•
Ensure that your router is connected to the Internet and computers and
devices are able to access the Internet through your router and make note of
the WAN (Internet) IP assigned to both routers under the Status page. See page
73 for checking the status page.
Example:
Router A WAN (Internet) IP Address: 10.10.10. 10
Router B WAN (Internet) IP Address:
10.10.10. 20
•
Make sure the LAN IP network on each router is different.
Note: Changing the LAN IP address of your router will change the LAN IP
network of your router. See page 53 for changing the LAN IP address.
Example:
Router A LAN IP Settings:
192.168. 10 .1 / 255.255.255.0
Router B LAN IP Settings: 192.168. 100 .1 / 255.255.255.0