TRENDnet TEW-659BRN, Руководство пользователя

Страница: 35 / 97

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-659BRV
32
5. Next to Dynamic VPN , check the Enable option and click Edit.
6. Next to
Tunnel Name
, enter the tunnel name in the field.
(e.g. Tunnel 1)
7. Enter the network settings for the IPsec VPN Server.
• Local Subnet – The local LAN IP subnet or network of your local VPN router.
(e.g. 192.168.10.0)
• Local Netmask – The local LAN subnet mask of your local VPN router.
(e.g. 255.255.255.0)
8. Next to
Preshare Key , enter the preshared key for your IPsec tunnel.
Note:
The preshared key entered must be the same as the preshared key configured in
VPN Router A.
Note:
The preshared key can consist of alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
9. Click the
PFS Group drop-down list, and select Same as Phase 1.
10. Next to Dead Peer Detection (DPD) , check the Enable option.
11. Next to IKE Proposal , check the Enable option. Next to ID 1 , click the Encryption
drop-down list and select AES-128 and click the DH Group drop-down list and select
Group 2 . Check the Enable option.
12. Next to
IPsec Proposal
, check the
Enable
option. Next to
ID 1
, click the
Encryption
drop-down list and select AES-128 . Check the Enable option.
13. Click Save at the bottom of the page to save the changes.
Note: If you would like to discard the changes, click Undo before you click Save .